(515)733-2890

KMJ Performance
is your source for CHEVY, FORD, MOPAR, BUICK, OLDSMOBILE,
PONTIAC, LINCOLN, MERCURY, CHRYSLER, DODGE
and more!

From intakes to oil pans, radiators to differential covers, we've got you covered!
Wholesale Prices Everyday!

CALL US:
515-733-2890
M-F 7:00AM - 6:00PM
Sat 8:00AM-4:30PM
Sun Noon-8:30PM
CHEVY FORD MOPAR PONTIAC
CATEGORIES
Air Cleaners
Alternators
Balancers/Dampers
Bearings
Bellhousings
Bolt and Stud Kits
Brakes
Camshafts and Lifters
Carburetion
Chassis
Connecting Rods
Cooling Accessories
Crankshafts
Cylinder Heads
Diesel Performance Upgrades
Differential Covers
Dipsticks
IGNITION
INTAKE MANIFOLDS
Exhaust
Filters
FITTINGS AND HOSES
Flexplates
Fuel Pumps
Gaskets
Gauges and Electrical
Heat Protection and Accessories
Motor/Trans Mounts
Oil Pans
Oil Pumps
Pistons
Piston Rings
Polyurethane
Radiators
Rear End
Rocker Arms
Rotating Assemblies
Safety Equipment
Starters
Timing Chains/Covers
Tools
Torque Converters
Transmission
Transmission Pans
Valve Covers
Valve Train
Water Pumps
Wheels and Tires
Apparel
OTHER
CHEVY
FORD
MOPAR
PONTIAC
Clearance-Surplus
 

MANUFACTURERS
ACC Performance
Design Engineering, Inc
EDGE Products
Fragola Performance Systems
Howards Racing Components
Kevko Racing Oil Pans & Components
MOROSO
Prothane Motion Control
QuickCar Racing Products
Quick Time Performance Products
Race-Quip
S.A. Gear
SCAT

RaceQuip Snell SA-2010 Full Face Helmet

RaceQuip Snell SA 2010 Full Face Helmet Large

  • Exceeds Snell SA-2010 Rating
  • Lightweight Prepeg Composite Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • Distortion Free 3mm Polycarbonate Low Fog Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • Tear-Off Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Provides Tight Shield Seal
  • Pre Drilled For Head & Neck Restraint Anchors
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • White High Gloss Finish
  • Uses a Standard Banana Shaped (1202) Tear-Off
  • Stocked in Sizes S - XL

The RaceQuip SA-2010 Full Face helmet is an all new design that incorporates prepreg construction based on steel tooling. In this process, the optimum ratio of resin is impregnated into the composite fabric (a combination of carbon fiber, kevlar, and FRP) prior to moulding. Next, the prepreg is forced into the steel mould using vacuum pressure, then oven cured to precise thermal specifications. This manufacturing technique eliminates excess resin weight and ensures uniform shell thickness while leaving the outer surface smooth and blemish free. The shell is then mated to an expanded polystyrene (EPS) liner to create a modern lightweight helmet design.


The RaceQuip Snell SA-2010 Full Face helmet is loaded with many features you would expect to find in a helmet costing much more. These features include a lightweight composite shell, aluminum pivot kit with an adjustable friction lock, plus a silicone shield gasket to keep out dust and dirt. A wide eyeport provides great peripheral vision and allows for the use of personal eyewear. The distortion free low fog polycarbonate face shield is a full 3mm thick and comes with eight position, hand ratcheting tear-off posts. Of course the SA spec means that both the helmet’s paint and interior are fire retardant so the RaceQuip Full Face helmet is suitable for use in the highest forms of auto racing competition. The RaceQuip SA-2010 Full Face helmet incorporates a Kevlar® chin strap for strength, a comfort fit blended Nomex® interior for great feel, and pre-drilled holes for easier installation of head & neck restraint anchors. Wrap all these features in a lightweight aero design composite shell and the result is the outstanding value delivered by the RaceQuip SA-2010 Full Face helmet.



Snell SA-2010 Helmet Information


The Snell Memorial Foundation has changed the SA helmet testing procedures to more accurately account for the size and weight of the driver’s head. It is also important to note that the specifications between an SA (auto racing) helmet and an M (motorcycle) helmet have become more divergent, which is why RaceQuip will only offer SA rated helmets for use in auto racing even though some sanctions or tracks may still allow use of an M rated helmet.The SA-2010 design changes have allowed us to re-tool in order to produce our helmets with a more modern production method. Ultimately the RaceQuip SA-2010 spec helmets will be lighter than previous models, have better fit and finish, and also have provisions for installation of a head and neck restraint. Most series, sanctions, and race tracks allow use of a helmet that goes back at least one Snell cycle and many allow two Snell cycles. Upon release of the 2010 models, most racers will be required to use a Snell SA-2000 or newer or an SA-2005 or newer helmet, depending on your rules.

SMALL MEDIUM LARGE X-LARGE
284112 284113 284115 284116
$249.99
FREE SHIPPING!
$249.99
FREE SHIPPING!
$249.99
FREE SHIPPING!
$249.99
FREE SHIPPING!

*NOTE: RaceQuip Helmets use a standard banana-shaped tear-off #1202.*
 

 

Specials
Clearance
View Cart
Contact Us
 

Search

Advanced search

Site secured by Rapid SSL


MORE SPECIALS!