Home :: Racing & Safety Equipment :: Racing Coil Springs :: 5x13" Rear Spring IMCA Circle Dirt Track Race 250 lb/in
Printable version

5x13" Rear Spring IMCA Circle Dirt Track Race 250 lb/in
5x13" Rear Spring IMCA Circle Dirt Track Race 250 lb/in
EIB 1300.500.0250

Nearly 50 years ago, inthe small German village of Finnentrop, Heinrich Eibach began producingsprings by bringing together skilled craftsmen who shared his passionand commitment to quality. Eibach Springs has grown into aninternationally renowned suspension company thanks to a guidingphilosophy that combines old-world craftsmanship with a relentlesspursuit of engineering excellence.

Eibach uses the worldsfinest quality, chrome silicon steel wire to produce coil springs withmaximum travel and minimum weight. Eibach Springs are metric sized and,therefore, not limited to the SAE sized wire used in the production ofmany of the springs currently on the market. Eibach Springs are coldformed on CNC machinery, insuring precise tolerances on spring ratesand free height, as well as longer life expectancy. Eibach Springs areheat tempered, shot peened, pre-set, and again tempered for maximumstress resistance. During a final process, they are phosphate treatedand red powder coated with a very durable epoxy coating for a greatlooking finish tha resists chipping and provides maximum protectionfrom corrosion. All springs are imprinted with an Eibach logo and partnumber for assurance of quality. Eibach Springs are guaranteed toremain within 3% rate and height for the life of the spring.

Eibach also designs andmarkets a complete line of Eibach-tuned dampers, anti-roll bars, struttower bars, alignment kits, motorcycle and motorsports springs

Eibach produces some ofthe finest conventional coil springs in the world. When other springssag or frequently need replaced, top race teams from F1 to WRC, from LeMans to NASCAR, inevitably turn to Eibach. To produce springs withunparalleled precision and repeatability, Eibach uses the worldsfinest Hi-Ten spring steel, produced to exceedingly precise tolerances.Eibach uses state-of-the-art technology in every step of themanufacturing process.

  • Ultra-Lightweight for Reduced Unsprung Mass
  • Maximum Deflection in Combination with Smallest BlockHeights
  • Exceptional Block Resistance and Durability
  • Precision Tolerances - The Tightest in the Industry
  • Precision Planparallel and Square End Configurations UnderUnloaded and Loaded Conditions to ± Degree
  • Lowest Side Loads with Load Center Ideally Located Relativeto Spring Axis
  • Highest Linearity and Guaranteed Rate Consistency Within 2%Of Advertised Rate
  • Each Spring Individually Tested and Rated
  • Eibach Springs Lifetime Warranty


TypeLengthIDRateBlock HeightTravelLoad at Block HeightWeight
Conventional Rear Loaded Height Rear (NASCAR Specs)1352504.018.9922486.19
Details
Manufacturer EIBACH
Part Number EIB 1300.500.0250
Condition: New
Diameter 5"
Height 13"
Rate 250 lbs/in
UPC 803050114310
 
Your Price: $54.99
Options
Quantity
  • Ask a question about this product

Send to friend

: *
: *
: *
Type the characters you see in the picture:


*

Customer feedback

Product rating

Sign in to rate

Product Reviews by Customers

There have been no reviews for this product.

Categories

Manufacturers

Your cart

Cart is empty
Additional Options

Authentication

Site secured by Rapid SSL

Help

News

01-31-2013
30 - We're Hiring!

All news   

Special